Upgrade to E-series

Retrofit flange kit SE to eVision

Model 130/150/170

Item code: SM176172

Flange kit for upgrading SE-series thruster models with new E-series electric motor.

Retrofit flange kit SE to eVision

Guide to navigating spare parts

Below you will see the top-level assembly of spare part groupings available to you. If you desire a component within the presented assembly group, click on the name tag below the image to be directed to a detailed spare parts list for that assembly group. If no additional spare parts are available, it means that the current assembly group must be purchased as a whole due to service or installation requirements. 

+
-
SM176172_Sparepart.svg
PHOTO NOT AVAILABLE
1

Bolt

Quantity: 4
DIN 912 - M10 x 30
PHOTO NOT AVAILABLE
2

Bolt

Quantity: 4
DIN 933 - M10 x 16
PHOTO NOT AVAILABLE
3

Washer

Quantity: 4
DIN 125 - A 10,5
PHOTO NOT AVAILABLE
4

Adapter flange

Item code: 140112
Quantity: 1
PHOTO NOT AVAILABLE
5

Flexible coupling unit

Item code: 7 1457
Quantity: 2
Go to product page
PHOTO NOT AVAILABLE
6

Flexible coupling Rubber element

Item code: 7 1458
Quantity: 1
Go to product page

Disclaimer

Sleipner warranties the original spare parts supplied only. The installer alone has responsibility for the installation of the spare parts. Do not attempt to fit replacement parts unless you are competent. If the spare part is fitted incorrectly, Sleipner Group will not be liable for any damage resulting.

The information given in the document was correct at the time it was published. However, Sleipner Group cannot accept liability for any inaccuracies or omissions it may contain. Continuous product improvement may change the product specifications without notice. Consequently, Sleipner Group cannot accept liability for any possible differences between product and document.